PLEASE SEE PRODUCT AVAILABILITY ON THE PRODUCT PAGE
Fish Finders, Chart Plotters, Navigation systems, Depth Sounders, and Sonar
Includes:
1 x Water- Proof In Line Blade Fuse Holder
1 x Blade Fuse Link
NMEA 2000 Standard Network (Micro C) Backbone Terminator Resistor and Waterproofing End Cap
120 Ohm Resistor
This standard Female NMEA 2000 light cable connector provides termination resistance for one end of the backbone of the network. Each male or female connector sold separately.
NMEA 2000 Standard Network (Micro C) Backbone Terminator Resistor and Waterproofing End Cap
120 Ohm Resistor
This standard male NMEA 2000 light cable connector provides termination resistance for one end of the backbone of the network. Each male or female connector sold separately.
Polycarbonate Collar Bracket
Stainless Steel Clamp
The (RAM-B-202) RAM marine grade aluminum base contains a 1" diameter rubber ball connected to a flat 2.5" diameter base. This mount has pre-drilled holes, including the universal AMPS hole pattern.
Material: Powder Coated Marine Grade Aluminum
Ball Size: 1" Rubber Ball "B" Size
Keep the front of your compatible Fusion marine stereo protected and free from dust with this cover.
Lowrance TR-120-KIT Network Terminator Kit, comprising One Male and One Female 120 Ohm N2K Terminators
Set of Four
Supply 12 Vdc power to your NMEA 2000 network with our 2 meter (6 ft) power cable.
Connects to Network Back Bone via a Tee Piece (Not Included)
Micro-C T-connector for connection of an additional network device
Transom Mounting Kit
Kit includes:
TStainles Steel Transom Bracket
Polycarbonate Bracket To Transducer Slide Mount
Stainless Steel Screws and Fasteners
The RAM® Track Ball™ consists of a B size 1 inch rubber ball molded to a high-strength composite base, a rubber friction washer, and a stainless steel T-bolt for sliding into virtually any track system. Simply insert or slide the RAM® Track Ball™ into your track and twist the ball clockwise to tighten in place.
Set of Four
Black
Use our inline terminator between the backbone cable and your compatible device to correctly terminate the network.
Extend your NMEA 2000 backbone with our backbone/drop cables
Use our power isolator to ensure sources that could power the bus are separated properly during installation of the NMEA 2000 network.
(Not for Hook (1st Generation) Models
Sun / Dust Protection Cover for
Lowrance Hook2-4x Series
Marine Fish Finders
Clip - In Quick Release Mount for Lowrance Hook2-4 and Hook2-5 Fishfinder and Chartplotter Combo Units
Fits the Following Lowrance Fishfinder Units
Hook2-4x,Hook2-5 Series, Hook Reveal -5 Series
NB: DOES NOT SWIVEL
Clip - In Swivel Mounting Bracket
Fits the Following Lowrance Fishfinder Units
Elite 5 & 7 Ti/ Elite-7 Ti2 - 7, Elite 3,4 & 5, Hook 3,4 & 5 Models.
Micro-C T-connector for connection of an additional network device
Use this adapter cable to connect an 8-pin transducer with XID to a 12-pin sonar port on a compatible marine device.
Our protective cover fits your compatible STRIKER™, helping to keep it safe from the harsh marine environment when not in use.
The RAM-B-201U-A consists of a medium double socket arm that accommodates 1 inch B size ball bases, device holders, and adapters. With an overall length 1.75 inch, this is theShort RAM® double socket arm size. The easy to adjust knob allows for near-infinite adjustability for your connected device.
BSM-1 Adapter Cable
7 pin Blue Connector to bare wires
The RAM-202 consists of a 1.5 inch diameter rubber ball connected to a flat 2.5 inch diameter base. This mount has pre-drilled holes, including the universal AMPS hole pattern.
Our Garmin BlueNet marine network cables offer additional cable lengths to help with installations. Additional sizes sold separately.
For All Lowrance HDS Series
Elite-9 Ti Elite-12 Ti
Hook-7 & Hook-9
Hook2-7 & Hook2-9 & Hook2-12
Hook Reveal -7 and Hook Reveal - 9
Fishfinder / Chartplotter Multifunction Displays
Connect an 8-pin transducer to a 4-pin sonar port on a compatible marine device with this adapter cable.
Extend your NMEA 2000 backbone with our backbone/drop cables
Extend your NMEA 2000 backbone with our backbone/drop cables
Extend your NMEA 2000 backbone with our backbone/drop cables
Fits HDI 83 / 200 Skimmer Transducer
Provides Additional Protection to Transducer
Kit includes:
Polycarbonate Protective Mounting Body
Stainless Steel Clamp
2 x PVC Cable Ties
RAM-202-LO11
Inserts directly to the back of Lowrance Elite -7 Ti2, Elite-5 Ti, Elite-7 Ti, Hook 4, Hook 5, Elite 5 & Mark 5 Fishfinders.
Garmin Marine Network to Garmin BlueNet network adapter cable
This Garmin BlueNet network adapter cable is often included with Panoptix™ transducers and sonar modules.
The RAM-B-201U consists of a medium double socket arm that accommodates 1" B size ball bases, device holders, and adapters. With an overall length 3.73", this is the standard RAM® double socket arm size. The easy to adjust knob allows for near-infinite adjustability for your connected device.
Use these adapter cables to link your GPSMAP® Series chartplotter to a compatible Fusion® stereo. These cables will connect a Garmin Marine Network port to an RJ45 port and are offered in male and female connector varieties to fit your specific system.
Position your Panoptix LiveScope™ LVS32 or LVS34 LiveScope Plus transducer on this 0 degree pole mount for an optimal viewing angle
(4/8/12-pin Transducers)
Convert your compatible device’s network connector from small (male) to large so it can connect to a compatible Garmin chartplotter.
Large Waterproof Connectors
The RAM-108BU consists of a 1.5" diameter ball connected to a base with single strap. The strap will accommodate rails from 1" to 2.1" in diameter.
Used as a Trolling Motor Stabiliser / Bounce Buster or Hadlebar / Rail Mount
Plate Dimensions: 6.25 x 2 inch rectangular plate
Material: Powder Coated Marine Grade Aluminum
Ball Size: 1.5 inch Rubber Ball Size C sized
Pre Drilled with Common Hole Patterns
Transom Mounting Kit
Kit includes:
TStainles Steel Transom Bracket
Polycarbonate Bracket To Transducer Slide Mount
Stainless Steel Screws and Fasteners
2 Foot Length Cable for Use with NMEA 2000 Networks
Use our male or female NMEA 2000 field-installable connectors to create custom-length drop cables and backbone extension cables. These connectors (sold separately) also can be used to shorten any NMEA 2000 drop/backbone cable.
Use our male or female NMEA 2000 field-installable connectors to create custom-length drop cables and backbone extension cables. These connectors (sold separately) also can be used to shorten any NMEA 2000 drop/backbone cable.
Extend your NMEA 2000 backbone with our backbone/drop cables
Kayak Motor Mounting Bracket Only (Watersnake)
Includes RS422 (NMEA 0183) & Power cable
Large Waterproof Connectors
Dimensions:
Our Garmin BlueNet marine network cables offer additional cable lengths to help with installations. Additional sizes sold separately.
The 50/200 kHz Skimmer transducer mounting kit includes a plastic bracket assembly to Fit the HDI 50 / 200 Khz a.k.a Low / High Chirp Transducer
Lowrance (Yellow Plug) HighSpeed Ethernet Connection Cable
6 Foot Length
Extend your NMEA 2000 backbone with our backbone/drop cables
Use our cable coupler to join two marine network cables end-to-end.
Dimensions:
(Excludes Fasteners and Knobs)
(Excludes zFasteners and Knobs)
Two Wire Type (No NMEA-0183 Data Cable)
Converts the Lowrance / Simrad (Yellow 5 Pin) Ethernet Socket to a Waterptroohed RJ45 Socket
Network your compatible device with this NMEA 0183 data communication cable. The right-angle connector helps with the tight fit often associated with flush mounting.
6 Foot Length Cable for Use with NMEA 2000 Networks
Lowrance (Yellow Plug) HighSpeed Ethernet Connection Cable
15 Foot Length
Large Waterproof Connectors
For 7/6 Pin Blue Connector Plug
Transducer Extension Cable
3.68 DIA BASE W/ 1in DIA POST 6 HOLES2.25 Inch Rubber BallPowder Coated Marine Grade AluminumBlack Powder Coat
Make NMEA 2000 installations easier with our multi-port T-connector. This solution creates a more robust NMEA 2000 backbone by reducing issues with breaking points as well as stress induced by long back bones. The rigid construction is less prone to failure and decreases installation time.
Transducer Extension Cable
15 Foot Length Cable for Use with NMEA 2000 Networks with Micro-C Connectors
Connect Minn-Kota US2 Sonar Transducer to Lowrance 9 Pin (Black) Universal Transducer Socket
(Lowrance Elite Ti / Ti2 / FS and HDS LIVE / HDS PRO
MKR US-2 16
Connect Minn-Kota US2 Sonar Transducer to Lowrance 7 Pin (Blue) Legacy Socket
MKR US-2 10
Plastic Transom Mount Bracket for Active Imaging, StructureScan 3D, TotalScan and LSS-2 Transducers
Also fits Simrad Cruise.
Length: 10 Feet
For Extending any Lowrance, Simrad or Airmar 9 Pin (Navico) Trasnsducer Cable
Connect four drop cables to your NMEA 2000 network at once with this 4-Way Micro-C Joiner.
Stainless Steel Transom Mount Bracket for Active Imaging, StructureScan 3D, TotalScan and LSS-2 Transducers
Does NOT FIT AI HD Transducer!
Also fits Simrad Cruise.
Length: 10 Feet
Lowrance (Yellow Plug) HighSpeed Ethernet Connection Cable
25 Foot Length
Dimensions:
Overall Length: 9.125"
Socket-To-Socket Length: 8.75"
Material: Powder Coated Marine Grade Aluminum Ball Size:
1.5" Rubber Ball "C" Size
Works with: HDS Gen2 Touch, HDS Gen3, HDS Carbon HDS LIVE and HDS PRO 9 - 10 - 12 and 16 inch units.
View video on Screen
Operates in full, split screen and panel adjusted configurations
Accepts composite video on RCA jack
Compatible with NTSC or PAL
Fits in line with current power cable
Extend the length of your compatible LiveScope™ transducer cable.
25 Foot Length Cable for Use with NMEA 2000 Networks
RAM-109HU
6,25 inch x 2 inch Mount Plate with 6 inch Bent swing arm
2 x 360 deg rotation Pivoting points, at the swing arm base at the center of the rectangular plate and at the end of the swing arm
Deck Mount
(Excludes zFasteners and Knobs)
Power 200 Watt
Shallow Water (</= 300 m / 1000 ft)
Cone Angle:
200 khz: 20 Degree
83 khz: 60 Degree
With Temperature
9 Pin (Black) Plug
Power 200 Watt
Shallow Water (</= 300 m / 1000 ft)
Cone Angle:
200 khz: 20 Degree
83 khz: 60 Degree
Shoot Thru Hull (Or Trolling Motor, but no temperature)
Depth Only
Part No: MM-9N
MNF No: 33-1392-01
Navico SKU 10-20-031
Length: 8 m
5 Pin Mix & Match 600 W Transducer to Navico / Lowrance / Simrad 9 Pin Male Connector
Surface mount your compatible ECHOMAP™ Ultra chartplotter/sounder combo using our bail mount with knobs; the mount tilts for optimum viewing. Plugging the cables into the mount’s quick-release cradle allows you to seat/unseat your device with ease.
Evinrude to Lowrance HD Elite Ti or Elite Ti2
Power 600 Watt
Shallow Water (</= 300 m / 1000 ft)
Cone Angle:
200 khz: 20 Degree
83 khz: 60 Degree
With Temperature
Lowrance (Yellow Plug) HighSpeed Ethernet Connection Cable
50 Foot Length
Part No: MM1-DT-9N
MNF No: 33-1393-01
Navico SKU 10-20-031
Length: 8 m
5 Pin Mix & Match for 1 KW 50 / 200 Transducers to Navico / Lowrance / Simrad 9 Pin Male Connector
The Eagle 4 provides a quick and easy solution for simple fishfinding.
This portrait orientated display is ideal for kayaks and small fishing boats with limited space.
The Wide Angle Bullet Transducer provides more coverage of the water column with a continuous right to left scroll across the screen, making it easy to interpret and spot fish.
The Fluid Level Sensor helps maintain awareness of tank level by sharing fluid level data with any compatible display connected to the NMEA 2000® network. It can be configured for fuel, oil, live well, fresh water, gray water and black water tanks using compatible Lowrance displays.
Includes 1st Year Update Subscription
On Micro sd Card
DISCOVER all you need to make the most of your time on the water. Full-featured Vector Charts with High-Res Bathy, including integrated Genesis® social data, subscription-free Easy Routing™ and Custom Depth Shading. See things your way with C-MAP.
Includes 1st Year Update Subscription
On Micro sd Card
DISCOVER all you need to make the most of your time on the water. Full-featured Vector Charts with High-Res Bathy, including integrated Genesis® social data, subscription-free Easy Routing™ and Custom Depth Shading. See things your way with C-MAP.
Coastal coverage of the east coast of Africa from Maputo Bay to the Horn of Africa, Zanzibar, Madagascar, Mauritius, Reunion and the Seychelles. Coverage includes the ports of Maputo, Mozambique; Dar es Salaam, Tanzania and Mombasa, Kenya.
Media: Micro SD Card and Adaptor
Includes 1st Year Navionics Subscription
Baia de Santa Maria (Angola) to Pebane Mozambique including a Selection of RSA Inland Waterways and South Atlantic Islands
Includes 1st Year Navionics Subscription
The Speed Sensor is a transom-mounted paddlewheel that uses the flow of water beneath the boat to measure your speed. Pair the Speed Sensor with a Fuel Flow Sensor to monitor your vessel’s fuel economy.
The Temperature Sensor is pre-configured for water temperature, but also can be configured to monitor live well, bait well, outside, inside, engine room, cabin, refrigeration and heating system temperature using compatible Lowrance displays.
Coastal coverage of the west coast of Africa from Dakar, Senegal to Cape Cross Bay, Namibia. Detailed coverage of the Cape Verde Islands, Sao Tome and Principe, St Helena Island and Ascension Island and the ports of Dakar, Senegal; Lagos, Nigeria and Luanda, Angola
Media: Micro SD Card and Adaptor
Includes 1st Year Navionics Subscription
Power 600 Watt
Deep Water (</= 750 m / 2 500 ft)
Cone Angle:
200 khz: 20 Degree
50 khz: 45 Degree
With Temperature
Adjusts to hull deadrise angles up to 22°. This ensures that the beam is vertically oriented to receive echos resulting in accurate depth readings.
Fitted with XSONIC plug for LOWRANCE & SIMRAD Multi Function Displays
Providing Bluetooth control for HDS Live and HDS Carbon units.
Includes:
-Remote
-Carbineer and lanyard
-Adjustable Velcro strap
-2 AAA batteries
With the GRA 10 Rudder Angle Analog Adapter aboard your vessel, you can give new life to your old gauges by making the transition from analog to digital
Use to Convert the Analog signal from the GRF 10 Rudder Feedback Sensor into Digital Data and Connect to NMEA2000 Network Backbone
OVERALL LENGTH:
12.98"
SOCKET-TO-SOCKET LENGTH
11.41"
BALL/SOCKET SIZE
D Size (2.25")
WEIGHT CAPACITY
Standard Use: 6 lbs
Heavy-Duty Use: 5 lbs
A.K.A Lowrance MB-36 RAM Mounting Bracket HEAVY DUTY Type "D" 2.5" Diameter Ball
Power 600 Watt
Shallow Water (</= 300 m / 1000 ft)
Cone Angle:
200 khz: 20 Degree
83 khz: 60 Degree
With Temperature
With "Down - Imaging" 455-800 Khz
7 Pin (Blue) Connector
Power 600 Watt
Shallow Water (</= 300 m / 1000 ft)
Cone Angle:
200 khz: 20 Degree
83 khz: 60 Degree
With Temperature
With "Down - Imaging" 455-800 Khz
Power 600 Watt
Deep Water (</= 750 m / 2 500 ft)
Cone Angle:
200 khz: 20 Degree
50 khz: 45 Degree
With Temperature
Power 200 Watt
Shallow Water (</= 300 m / 1000 ft)
Cone Angle:
200 khz: 20 Degree
83 khz: 60 Degree
With Temperature
With "Down - Imaging" 455-800 Khz
Garmin Airmar T80 Water temp probe, 8-pin, Stainless steel, Transom mount
The P66 Multisensor combines depth, and temperature functions in one housing. And it features our 50/200 kHz, 600 Watt dual-frequency, ceramic element. This hydrodynamic housing with its rounded nose reduces the turbulence under the transducer’s acoustic face for clear display images. It is Airmar’s best transom mount for boats up to 8 m (25') long.
Large Waterproof Connectors
